...

Resin Bound vs Resin Bonded Driveways: What Is the Difference?

Get a Quote

Resin bound driveway at a house entrance

When homeowners in Surrey ask us about a resin driveway, one of the first questions is usually “bound or bonded?” The names are almost the same, and the finished surfaces can look similar in photos, but they are built in very different ways and perform differently once they are down. Choosing the wrong one can mean loose stones, puddles or a driveway that does not meet drainage rules.

What is a resin bound driveway?

With a resin bound surface, the decorative stone is mixed thoroughly with a clear resin before it is laid. The mix is then spread and hand-trowelled over a prepared base to a set depth, creating a smooth, even surface where every stone is fully coated and locked in place.

Because there are tiny gaps between the coated stones, water can pass straight through the surface into the base below. That makes resin bound a permeable surface.

Advantages of resin bound

  • Permeable. Rainwater drains through rather than running off, which helps prevent puddles and can help you meet the rules on drainage for front gardens.
  • Smooth finish. Comfortable to walk on and suitable for pushchairs, wheelchairs and bikes.
  • No loose stones. The stones are bound into the resin, so they are not kicked or tracked into the house.
  • Low maintenance. An occasional sweep and wash keeps it looking good.

What is a resin bonded driveway?

A resin bonded surface works the other way round. A thin layer of resin is spread over a solid base, and loose stone is then scattered on top while the resin is still wet. The stones stick to the resin, and any excess is swept off once it has cured.

The result has a textured, gravel-like appearance. However, the resin layer underneath is solid, so water cannot drain through it. That makes resin bonded a non-permeable surface.

Things to consider with resin bonded

  • Not permeable. Water runs off the surface, so you need to plan where it goes.
  • Some stone loss. Only part of each stone is stuck down, so a small amount of loose stone can come away over time, especially where cars turn.
  • Textured finish. It gives good grip and a gravel look without the loose gravel.

Side-by-side comparison

Resin bound Resin bonded
How it is laid Stone mixed with resin, then trowelled Stone scattered onto a resin coat
Drainage Permeable Non-permeable
Finish Smooth Textured, gravel-like
Loose stones None Some, over time
Best for Driveways, paths and patios where drainage matters Areas where a textured, grippy surface is wanted and drainage is handled separately

Why the base matters as much as the resin

Whichever system you choose, it is only as good as what is underneath it. A resin surface is a thin layer, so it will follow any cracks, dips or movement in the base below.

  • An existing tarmac or concrete driveway can sometimes be used as a base if it is sound, level and free from major cracks.
  • For a resin bound driveway to stay permeable, the base underneath also needs to let water through. Laying resin bound over a solid, non-draining base means the water has nowhere to go.
  • Where the existing surface is breaking up, the right answer is usually to dig out and lay a new, properly compacted base.

We always check the existing surface before quoting so you know whether it can be overlaid or needs replacing.

Do I need planning permission?

For front gardens, the rules focus on drainage. In most cases, a permeable surface such as resin bound, or a surface that drains onto a permeable area within your property, will not need planning permission. A non-permeable surface over 5 square metres that drains onto the road usually will. Our article on driveway planning permission in Surrey explains this in more detail, and if your home is listed or in a conservation area it is always worth checking with your local council.

Which should you choose?

For most driveways we work on across Surrey, resin bound is the better choice. It drains properly, keeps the stones in place and gives a smooth finish that is easy to look after. Resin bonded can still be a good option for certain paths or areas where grip is the priority and drainage is dealt with separately.

If you are still deciding between resin and other surfaces, our guide to tarmac, resin, block paving and gravel compares the main options.

Choosing a colour and stone blend

Resin driveways come in a wide range of stone blends, from warm golds and buffs to cool greys and silvers. A few practical points help narrow it down. Lighter blends show tyre marks and staining more readily, while mid-tone and mixed blends are more forgiving day to day. It is worth looking at samples next to your brickwork, front door and window frames, and in both sunny and overcast light, before choosing. Many homeowners also use a contrasting border, either in a different resin colour or in block paving, to frame the driveway and define the edges. Edging matters for more than looks: a solid edge restraint stops the resin from breaking away at the sides.

Frequently asked questions

Can resin be laid over my old driveway?

Sometimes. If the existing tarmac or concrete is sound and level, it may be suitable as a base. Cracked, sunken or broken surfaces usually need to be removed first.

Will a resin driveway fade?

Some resins can discolour in strong sunlight. Using a UV-stable resin helps the colour of the stone stay true over time.

How long before I can use it?

Curing time depends on the weather and temperature. Your installer will tell you when it is safe to walk on and when you can drive on it.

Resin driveways in Godalming and across Surrey

LF Roofing & Driveways installs resin driveways across Godalming, Guildford, Farnham and the surrounding areas. Call 07311 065 336 for a free quote.

Leave a Reply

Your email address will not be published. Required fields are marked *

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.